Flexible Magnetostrictive Probes for Automatic Tank Gauge Systems

Descripción

PUMP STICK PRO flexible probes for Automatic Tank Gauge systems are level sensors designed for measuring fuels and other liquids in tanks.

These ATG probes have two floats, one to measure the fuel level and the other to determine the water level inside the tank.

Pump Stick PRO Tank Gauge system´s probes work with magnetostrictive technology, which provides continuous and highly accurate measurements. On the other hand, it has a sensor that will allow you to make temperature compensation in each measurement, to determine net and gross volume of the product.

As an option, you can include a density meter to measure the density of the fluids in the tank. In addition, it detects any change in fuel quality and allows you to set programmable alarms.

All these values are transmitted by the probe to our TANK Black ATG Console where the user can read them in a simple and graphic way.

These magnetostrictive probes have a measurement range that goes from 400cm to 23m in height.

There are two types of flexible probes PUMP STICK PRO, wired and wireless.

Wireless flexible probes were designed to avoid civil works on sites or loading yards and obtain considerable savings when installing a wet stock control system in your fuel tanks.

Wireless probes include a router and an antenna that connects to our TANK Black Automatic Tank Gauge system. This router automatically communicates with up to 32 probes with a maximum distance range of 1 km in open spaces.

The router makes efficient use of the probe battery to maximize the life of the probe, which can last between 1 and 2 years.

 

 

Please fill the contact form to be advised by of our Account Executive.

Ask us about this product and we will send you all the information you need. To do this, complete the following form and we will attend to you as soon as possible.