Cúbica PC: Tank laiser calibration

Why waste time and sales?

Cubing or gauging easily and quickly, don’t waste time or effort.
Use precise technology, with better results.

No need to transfer fuel, avoiding dangerous and costly operations.

Cubic Pc cubics/outputs fuel tanks with an accuracy of 0.3% – 0.5%.

Advantages of Cubic PC

Cubica Pc generates a calibration table (mm, liter).

Improves the accuracy of the reading of the remote measurement system.

Scan the tank in less than 30 min.

It is not necessary to fill or empty the tanks.

Minimize downtime at the service station.

Create very precise gauging tables.

The generated table helps to check the accuracy of the sales.

Ability to work and to determine the inclination of the tank.

Reliable and safe (ATEX).

Meets all environmental, health and safety (EHS) criteria.

The process

Make sure the tank is not filled more than 25% full.

Install the equipment where the remote measurement probe is located or search for another entry in the vicinity.

Remove any obstacles between Cubica Pc and the bottom of the tank to ensure accurate volume analysis.

Start the scanning process.

Digitization is done in 30 min.

After the analysis, the data is sent to the server through the Wi-Fi network.

An analyst will process the file.

The table of capacity/cubulation is sent to the client by email.

The necessary requirements in the work

The fuel level must not exceed 25% of the total height.

Filling or emptying the tank is not necessary.

To install it are requirements:

– 1 female hole 2″

– 1 circular space around the equipment, r =3″

– 1 space 20″ high